美国MERCOTAC水银滑环M830现货特价
美国MERCOTAC水银滑环M830现货特价
美国MERCOTAC水银滑环M830现货特价
Model 830
Eight Conductors,
2@4amps, 6@30amps
Disconnects included
(4 sm., 12 lg.)
Boot Kit available
Available with stainless steel ball bearing (830-SS)
|
 |
 |
| |
| |
| Model No. |
Terminals |
Voltage
AC/DC |
Amp
Rating
@240VAC |
Max.
Freq.
MHz |
Contact
Resistance |
Max.
RPM |
Temp
Max. F (C) /
Min. F (C) |
Rotation
Torque (gm-cm) |
Circuit
Separation |
| 830 |
8 |
0-250 |
2@4/6@30 |
100 |
|
<1m
|
 |
|
200 |
140 (60) /-20(-29) |
1000 |
|
>25M
|
|
|
| 830-SS |
8 |
0-250 |
2@4/6@30 |
100 |
|
<1m
|
|
|
200 |
140 (60) /-20(-29) |
1000 |
|
>25M
|
|
|
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
 Model 830 Accessories |
 |
 |
 |
55110
22 - 18 AWG (qty. 4 included) |
55253
Shrink Tube (qty. 6 included) |
55252
Terminal 16 - 14 AWG
(qty. 6 included) |
 |
 |
55251
Terminal 16 - 14 AWG
(qty. 6 included) |
57830
Boot Kit for dust or splash protection
IP51 |
| |
|
Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)
|
| |
| Model 830 Standard Wire Connections |
| Model 830 Wire Connections With Optional Boot Kit |
|
|
| Model 830 Suggested Mounting Methods |
| Model 830 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates. |
|
|
Typical Body Mount Hole Dimensions
|
| MODEL |
HOLE DIAMETER (Ø) * |
DEPTH |
| 830, et al |
1.772" (45.00) |
.80" (20) |
| |
|
|
| Typical Bushing Mount Hole Dimensions |
| 830, et al |
1.125" (28.57) |
.40" (10) |
| *Inch (mm) Tolerance Ø |
+.001" (+.025) |
|
|
| |
-.000" (-.000) |
|
|
|
|
Installation Notes:
- the up arrow should not point below horizontal
- do not solder to or bend connector tabs
- avoid lateral forces and mechanical loads (overly stiff or tight wires)
- do not rigid mount both ends of connector
- limit mounting eccentricity (runout / wobble) to .005" (.13mm)
- provide overload protection within the circuit
- avoid vibration and bumping motions
|