| |
Model 110-T
One Conductor,
10 Amp
Model 105
One Conductor,
4 Amp |
 |
|
Mounts at the end of a rotating axis.
Mount by the press fit receptacle accessory.
Wires attach using the accessory receptacle and cap. |
| Mercotac models 110-T & 105 are ideal for shaft grounding applications, including HVAC and VFD motor shaft grounding, thus avoiding very costly bearing damage. |
|
| |
| Model No. |
Terminals |
Voltage
AC/DC |
Max
Amp
Rating |
Max.
Freq.
MHz |
Contact
Resistance |
Max.
RPM |
Temp
Max. F (C) /
Min. F (C) |
Rotation
Torque (gm-cm) |
Circuit
Separation |
| 110-T |
1 |
N/A |
10 |
200 |
|
<1m
|
 |
|
3600 |
140 (60) /-20(-29) |
35 |
N/A |
| 110-TS |
1 |
N/A |
10 |
200 |
|
<1m
|
|
|
3600 |
140 (60) /-20(-29) |
35 |
N/A |
| 110-TL |
1 |
N/A |
10 |
200 |
|
<1m
|
|
|
1200 |
140 (60) /-20(-29) |
10 |
N/A |
| 105 * |
1 |
N/A |
4 |
200 |
|
<1m
|
|
|
7500 |
212 (100) /45(7) |
<10 |
N/A |
| 105-SS * |
1 |
N/A |
4 |
200 |
|
<1m
|
|
|
7500 |
212 (100) /45(7) |
<10 |
N/A |
"T" designator indicates standard model
"TS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
"TL" designator indicates low torque
"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
* indicates high temp. high RPM
Note: The anodized aluminum housing of the 110 & 105series Mercotac is electrically "hot" to the internal conductor.
 Model 110-T & 105 Accessories |
| |
| Model 110-T & 105 Connections |
|
|
|
| Note: The metal receptacle used for mounting is electrically conductive. Therefore, if desired, it can be used as the electrical connection between the 110 and the rotating member of the machine using Part #5920. However, if an insulated mounting at the rotating member is being used, then Part #5921-S with six inch wire lead is used for the electrical connection. |
| Model 110-T & 105 Suggested Mounting Methods |
| Model 110-T is typically mounted by the knurled metal receptacle, which is press-fit into the rotating member of the machine When mounting horizontally, mount the Mercotac so the body of the connector rotates. |
|
|
Receptacle Mount Hole Dimensions
|
| MODEL |
HOLE DIAMETER (Ø) * |
DEPTH |
| 5920, 5921-S |
.283" (7.19) |
.35" (8.89) |
| *Inch (mm) Tolerance Ø |
+.001" (+.025) |
|
|
| |
-.000" (-.000) |
|
|
|
|
|
|