韩国DRASTAR，单级大流量低压稳压器092-0100C-1S-5，1/2NPT

韩国DRASTAR，单级大流量低压稳压器092-0100C-1S-5，1/2NPT

韩国DRASTAR，单级大流量低压稳压器092-0100C-1S-5，1/2NPT

韩国DRASTAR，单级大流量低压稳压器092-0100C-1S-5，1/2NPT

Products Feature

Single Stage High-flow Low Pressure Regulators(NPT 1/2″)

092 Series is a 1/2” NPT type single-stage pressure reducing regulator specially designed to use for high-flow low-pressure applications. Made of stainless steel for body and all internal parts, 092 series has wide range of applications.

With DRASTAR’s patented (patent #1086199) “push and lock type handle”, you can operate it easily and stably; “locking” by pushing down the handle will prevent any slight change of pre-set pressure value, which could possibly be caused by any vibration from gas pipeline or ambient applications and the other way “unlocking” by pulling it back enables you to adjust the pressure value freely again.

◈ 1/2″ NPT type high flow low pressure regulator

◈ Inlet pressures are 3000psi(210bar) or 600psi(42bar) and outlet pressures are 25psig (1.7 bar), 50psig(3.5bar), 100psig(7bar), 250psig(17bar), 500psig(35bar)

◈ Panel mounting nut or wall mounting bracket available as option

◈ W092-0000x-1S or W092-0500x-1S: W model is only for Liquid or Water

◈ Design proof pressure: 150% of maximum rated

◈ Applicable for general gas line, bulk gas line, research labs, specialty gases for analytical application, high purity gases, mixing gases, and corrosive gases as well as liquids.

[DRASTAR Regulators are Oil-free]

※ DRASTAR’s all pressure regulators are assembled, cleaned, inspected, and packed in clean-room equipped with clean bench, helium detector, particle counter, ultrasonic cleaner, ultrapure water system, vacuum packaging machine, etc. through oxygen cleaning procedure in compliance with process and regulations indicated in CGA 4.1. and or ASTM G-93 and are free of any grease or oils.

※Caution: Filtering (gas 7㎛ ~ 15㎛, water 15㎛ ~ 80㎛) is a MUST to use in the general gas application other than high purity gases. Otherwise, it may cause a failure to the regulators. It is strongly recommended to install filter for extension of life span and saving the maintenance expense.

 orts

 1/2" Female NPT
 092-0000A-1S   2-Ports
 092-0000L-1S   3-Ports
 092-0000C-1S   4-Ports

 Design Pressure

 150% maximun rated

 Leak Rate  Certification

 to 2 x 10 -8 atm ccc Helium available.

 Body Materials

 092-0100L-1S Stainless steel 316L Standard
 092M-0100L-1S Monel 400
 092H-0100L-1S Hastelloy C 276
 092-D51-0100L-1S Duplex F51 Stainless steel

 Bonnet Material

 Nickel Plated Brass (092S / Stainless steel 316L Optional)

 Diaphragm

 092-0025x-1S     Stainless steel 316L
 092-0025x-1SH   Hastelloy-C Optional

 Main Valve

 Stainless steel 316L

 Valve Spring

 Stainless steel 316L

 Valve Seat

 Teflon (Kel-F, Polyimide, etc.. Optional)

 Inlet Pressure  Ranges

 092-0000x-1S     3000psi(210bar)
 092-0000x-1S-5  600psi(42bar)

 Outlet Pressure  Ranges

 092-0025x-1S   25psi (1.7bar)
 092-0050x-1S   50psi (3.4bar)
 092-0100x-1S   100psi (7bar)
 092-0200x-1S   200psi (17bar
 092-0350x-1S   350psi (24bar
 W092-0500x-1S   500psi (35bar) (500psi W model Only)

 Operating  Temperature

 -40°C ~ +70°C (-40°F ~ +165°F)   Standard
 092-0000x-xx-H1 +120°C   Optional
 092-0000x-xx-H2 +250°C   Optional
 092-0000x-xx-H3 +320°C   Optional 
 +400°C ~ +540°C (+750°F ~ +1000°F)   Optional

 Flow Capacity

 Cv=1.0   Standard

 Standard Optional

 Inlet CGA, Inlet Outlet Gauge etc..

 Weight

 1.7kg