韩国drastar单极大流量调压阀，092-0100C-1S-5现货3台
韩国drastar单极大流量调压阀，092-0100C-1S-5现货3台
韩国drastar单极大流量调压阀，092-0100C-1S-5现货3台
Products Feature
Single Stage High-flow Low Pressure Regulators(NPT 1/2″)
092 Series is a 1/2” NPT type single-stage pressure reducing regulator specially designed to use for high-flow low-pressure applications. Made of stainless steel for body and all internal parts, 092 series has wide range of applications.
With DRASTAR’s patented (patent #1086199) “push and lock type handle”, you can operate it easily and stably; “locking” by pushing down the handle will prevent any slight change of pre-set pressure value, which could possibly be caused by any vibration from gas pipeline or ambient applications and the other way “unlocking” by pulling it back enables you to adjust the pressure value freely again.
◈ 1/2″ NPT type high flow low pressure regulator
◈ Inlet pressures are 3000psi(210bar) or 600psi(42bar) and outlet pressures are 25psig (1.7 bar), 50psig(3.5bar), 100psig(7bar), 250psig(17bar), 500psig(35bar)
◈ Panel mounting nut or wall mounting bracket available as option
◈ W092-0000x-1S or W092-0500x-1S: W model is only for Liquid or Water
◈ Design proof pressure: 150% of maximum rated
◈ Applicable for general gas line, bulk gas line, research labs, specialty gases for analytical application, high purity gases, mixing gases, and corrosive gases as well as liquids.
[DRASTAR Regulators are Oil-free]
※ DRASTAR’s all pressure regulators are assembled, cleaned, inspected, and packed in clean-room equipped with clean bench, helium detector, particle counter, ultrasonic cleaner, ultrapure water system, vacuum packaging machine, etc. through oxygen cleaning procedure in compliance with process and regulations indicated in CGA 4.1. and or ASTM G-93 and are free of any grease or oils.
※Caution: Filtering (gas 7㎛ ~ 15㎛, water 15㎛ ~ 80㎛) is a MUST to use in the general gas application other than high purity gases. Otherwise, it may cause a failure to the regulators. It is strongly recommended to install filter for extension of life span and saving the maintenance expense.
Ordering Information.
(W) 092-0025L-1SH-5-V-H1
BASIS
SERIES
NUMBEROUTLET
PRESSURE
RANGEPORT
TYPEFLOW
CAPACITYDIAPHRAGM
MATERIALINLET
PRESSURESELF
VENTINGHIGH
TEMPE-
RATUREStandard
Inlet Pressure
3000psig
(210bar)
Body :
STS 316L
Only
M=Monel400
D51 = STS
Duplex F51
H =
Hastelloy C 276
0025 = 25psi
(1.7bar)
0050 = 50psi
(3.5bar)
0100 = 100psi
(7bar)
0200 = 200psi
(14bar)
0350 = 350psi
(24bar)
0500 = 500psi
(34bar)
A = 2-Ports
L = 3-Ports
C = 4-Ports
R = 3-Ports
M = 4-Ports1 = 1/2"
Female NPT
S = Cv 1.0
StandardSTS 316L Standard
H =
Hastelloy-C
Optional5 = Inlet
600psi(42bar)
OptionalV = Self-
Venting
OptionalH1 = 120°C
H2 = 250°C
H3 = 320°C
Optional
※ Note : W092-0000x-1S or W092-0500x-1S : (W) model is only for Liquid or Water
Specification
Ports 1/2" Female NPT
092-0000A-1S 2-Ports
092-0000L-1S 3-Ports
092-0000C-1S 4-Ports Design Pressure 150% maximun rated Leak Rate Certification to 2 x 10 -8 atm ccc Helium available. Body Materials 092-0100L-1S Stainless steel 316L Standard
092M-0100L-1S Monel 400
092H-0100L-1S Hastelloy C 276
092-D51-0100L-1S Duplex F51 Stainless steel Bonnet Material Nickel Plated Brass (092S / Stainless steel 316L Optional) Diaphragm 092-0025x-1S Stainless steel 316L
092-0025x-1SH Hastelloy-C Optional Main Valve Stainless steel 316L Valve Spring Stainless steel 316L Valve Seat Teflon (Kel-F, Polyimide, etc.. Optional) Inlet Pressure Ranges 092-0000x-1S 3000psi(210bar)
092-0000x-1S-5 600psi(42bar) Outlet Pressure Ranges 092-0025x-1S 25psi (1.7bar)
092-0050x-1S 50psi (3.4bar)
092-0100x-1S 100psi (7bar)
092-0200x-1S 200psi (17bar
092-0350x-1S 350psi (24bar
W092-0500x-1S 500psi (35bar) (500psi W model Only) Operating Temperature -40°C ~ +70°C (-40°F ~ +165°F) Standard
092-0000x-xx-H1 +120°C Optional
092-0000x-xx-H2 +250°C Optional
092-0000x-xx-H3 +320°C Optional
+400°C ~ +540°C (+750°F ~ +1000°F) Optional Flow Capacity Cv=1.0 Standard Standard Optional Inlet CGA, Inlet Outlet Gauge etc.. Weight 1.7kg
Recommendations
Each product is manufactured since being taken into consideration of the best safety and easy manipulation. However in order to use the regulator in most safe and effective way, you are recommended to use the actual pressure within the range of its 25% ~ 75%. For making precise, smooth movement and to prolong product life, strongly recommended to make a use within above mentioned range.
[ Unit conversion program ]
unitunit conversionatmosphereatmbarbarmbarmbarkg_f/cm^2kg_f/cm^2Pound per Squire InchPSI (= lb/in^2)dyne per square centimeterdyne/cm^2PascalPaNewton per square meterN/m^2Hecto PascalhPaKilo PascalkPaMega PascalMPa수주(水柱)밀리미터mm H_2O (= mm Aq)수주(水柱)인치in H_2O (= in Aq)수은주(水銀柱)밀리미터mm Hg (= Torr)수은주(水銀柱)인치in Hg